Detailed Product Description
Long Radius Stainless Steel Elbow to ANSI B16.9
1)Manufactured as per ANSI B16.9: 2007
2)Special requirement negotiable
Long Radius Stainless Steel Elbow to ANSI B16.9
Standard
ANSI/ASME B16.9: 2007
Size & Dimensions
Wall Thickness: as per ASME B36.19M-1985(R1994) or other assigned standard of the buyer
--Long Radius Elbows
-Long Radius Returns (180 deg. Elbows)
Non-standard elbow(those with different angles other than 45 / 90/ 180) available upon requests.
Elbows with O.D. greater than 1200mm available upon request.
Tolerance
As per requirement of ANSI B16.9:2007
GENERAL NOTES:
(a) All dimensions are in millimeters.
(b) Tolerance are equal plus and minus except as noted.
NOTES:
(1) The inside dia. and the nominial wall thicknesses at ends are to be specified by the purchaser.
(2) A minimum wall thickness of 87.5% applies unless the purchaser specifies a different wall thickness tolerance. See ANSI B16.9:2007 Fig. 1, Note(1)(a).
(3) Out-of-round is the sum of absolute values of plus and minus tolerances.
(4) This tolerance may not apply in localized areas of formed fittings where increased wall thickness is required to meet design requirements of ANSI B16.9:2007 para. 2.2.
(5) Unless otherwise specified by the purchaser, these tolerances apply to the nominal inside dia., which equals the difference between the nominal outside dia. and twice the nominal wall thickness.
Material
Carbon Steel - in accordance with ASTM A 403, A 815 or upon specially customized requirement